How to make a front button jacket.


Home(Japanese)	Home	Introduction	How to sewing.	Paper pattern download	How to Sewing video.

Usako's sewing studio. > How to sewing. >

How to make a front button jacket.

Translate
...etc

	Put the facing material on the reverse of the fabric. Fist rough cut material bigger than pattern. Also rough cut interfacing bigger than pattern and smaller than material and stick on the material with iron.
	Make a copy of paper pattern mark.
	That is a method of zig zag sewing for home use. Make edge of cloth comes to center of metal holder. When needle goes down on right side, As to be forced out and sew zig zag. This way a part that being forced out covering edge of cloth and not to get frayed.
	Front and inside the cover layer with cloth folded inside out and sew together where red line at. Divide the margin to sew up by iron. Divide the margin to sew up.
	Sew the pocket.
	Sew the shoulder of the facing.
	Sew the shoulder and side face to face.
	Sew the collar face to face. Don't sew the hem.
	Turn the material in side out. Sew the topstitching from the 0.5cm in from the center front of edge.
	Sew the collar to the neck hole 0.5cm from the edge.
	Put the facing and body together face to face.
	Snip around the curve.
	Fold the hem to the other side with iron 2cm in from the edge. Sew the topstitching from the 0.5cm in from the center front of edge. Hand sew the facing by a blind stitch
	Fold the hem to the other side with iron 2cm in from the edge. Sew the topstitching from the 0.5cm in from the center front of edge. Hand sew the facing by a blind stitch
	Make button hole. Please read sewing machine of explanatory note.
	Sew sleeve. There extra space on the sleeve, reason for make it 3 demential. Make sure squeeze the gather. sew 2 lines on the 2~3mm on top and bottom from front of finishing line. "Important" Beginning of sewing and end of it make sure starting from a way over 5cm from the edge and make sure have extra thread.
	How to squeeze gather Make longer sew length on the machine.
	Turn down the dial for the upper thread.
	Start sewing from 1.5cm from the edge. Sew 2 lines in margin to sew up. Sew 2 lines gatherer better than 1 line. For beginning of sewing , make sure have extra thread after machined. For the end make sure have extra thread and cut.
	After sew 2 lines on top and bottom and pull the under thread, it makes gather.
	Made to original thread adjustment and sew the side.
	Turn the material in side out. Fold the cuff to the reverse side with iron 2cm in from the edge Sew the cuff.
	The last, Layer together sleeve and main part. Layer center of sleeve , margin of bottom of sleeve and margin of arm together and adjusting gather, place with marking pin. For beginners, do baste well and take out all marking pin and sew with machine.
Size Size1 Bust 72~78cm Waist 58~64cm Hip 82~90cm Height 152cm Size2 Bust 79~87cm Waist 64~70cm Hip 87~95cm Height 158cm Size3 Bust 86~94cm Waist 69~77cm Hip 97~105cm Height 163cm We made this pattern for person who from the above sizes. Also this pattern come with 1/10 size. You don't have to count amount of material. Just line up inside of 1/10 size and you can figure how much you need material.	Most of Japanese anime male character's school outfit are stand collar style or tailor collar. Just to have this pattern can make most of anime school outfit cosplay outfit. *This is a only top outfit. You can make outfit blow the list.(sample) Kyo kara Maoh! REBORN!(mukuro) Jojo Revolutionary Girl Utena(utena) Zettai Karen Children( Fuma no Kojirou HETALIA BLEACH yu-yuhakusyo(kurama) The king of fighters(kyo kusanagi) Shin Megami Tensei: Persona 4 Shin Megami Tensei: Devil Summoner: Raidou Kuzunoha vs. The Soulless Army (Raidou kuzunoha) It is tailor jacket pattern, You can arrange not only school outfit such as army outfit etc..

Home > How to sewing tutorial.

Home(Japanese) | Home | Introduction | Paper pattern download. | How to Sewing video.