How to make a Francis Bonnefoy costume. (France) cosplay.

	Coat 1) Put the paper pattern on to the material and mark around it. On youhave done this cut along the lines. Fist rough cut material bigger than pattern. Also rough cut interfacing bigger than pattern and smaller than material and stick on the material with iron. front side. reverse side. facing material.
	2) Make a copy of paper pattern mark.
	3) Let's make notches for alignment before sewing it (You put an around 5-8mm cut in a margin for a seam so that the cut is not seen from the right side as to align the position of sleeve and sleeve cap as well.)
?zig zag	4) That is a method of zig zag sewing for home use. Make edge of cloth comes to center of metal holder. When needle goes down on right side, As to be forced out and sew zig zag. This way a part that being forced out covering edge of cloth and not to get frayed.
	5) Fold and sew the darts.
	6) Sew the front parts and front facing together face to face. Sew the side back parts and center back parts together face to face.
	7) Sew to the end of the opening. Sew the back parts of lining. Spread open the seam.
	8) Sew the underlining material 1cm in from the edge.
	9) Fold the material in from the seam line.
	10)
	11)
	12) Spread open the seam.
	13)
	14) Sew the shoulder. Sew the underlining shoulder.
	15) Sew lining same as front material. Layer the underlining on front material make it as mid front.
	16) Snip around the curve.
	17) Turn the material inside out and stitch where red line.
	18) Put the center parts together face to face. Turn inside out and top stitch where red line.
	19)
	20)
	21) Sew sleeve. There extra space on the sleeve, reason for make it 3 demential. Make sure squeeze the gather. sew 2lines on the 2~3mm on top and bottom from front of finishing line. "Important" Beginning of sewing and end of it make sure starting from a way over 5cm from the edge and make sure have extra thread.
	22) How to squeeze gather Make longer sew length on the machine.
	23) Turn down the dial for the upper thread.
	24) Start sewing from 1.5cm from the edge. Sew 2 lines in margin to sew up. Sew 2 lines gatherer better than 1 line. For beginning of sewing , make sure have extra thread after machined. For the end make sure have extra thread and cut.
	25) After sew 2 lines on top and bottom and pull the under thread, it makes gather
	26) Made to original thread adjustment and sew the underarm. Made to original thread adjustment and sew the underlining of underarm.
	27) Sew the cuffs and make a tube.
	28)
	29) Turn the material inside out. Sew the topstitching 0.5 - 1cm in from the edge. (red line).
	30) Sew the cuff 0.5cm in from edge.
	31) Sew the bottom of sleeve 1cm in from edge.
	32) Sew the bottom of sleeve 1cm in from edge.
	Layer together sleeve and main part. Layer top of sleeve , margin of bottom of sleeve and margin of arm together and adjusting gather, place with marking pin. For beginners, do baste well and take out all marking pin and sew with machine. how to make the sleeve of video.
	34) Sew the face of sleeve and underlining of sleeve Pin the underlining and armhole together.
	35) Fold the hem.
	36) Attach a button.
Explanation on the pattern. Area that apply interfacing. Finishing line margin to sew up position where gather. position where cover with baiastape, where mark the pattern. adjusting position of sewing together. place cut already 5~7mm adjusting position of sewing together. make a hall on the conner. direction of material. layer this line will parallel with height of material. Where the corner, drawing a point the material as a mark.	Long cape pattern here. Cape pattern. (free)


Home(Japanese)	Home	Introduction	How to sewing.	Paper pattern download	How to Sewing video.

How to make a Francis Bonnefoy like costume. (France)